Plots - Adjustable Tilting Supports

Range of adjustable tilting supports for floating floors in height.

Plot calculator

The most versatile Plot on the market

The base has been designed with large grips for strength and stability.

BEST FIT

The octagonal design of the base allows the positioning to be pushed to the limit with the 8 corners, and also allows the area to be trimmed if necessary.

SELF-LEVELLING ON STAND

The tilting at the top allows a self-levelling angle of up to 5.24% and locking of the required angle with a key.

ONE PRODUCT AND A WIDER RANGE OF HEIGHTS

You can combine the 2 types of bases with the ROSCA 10 or ROSCA 50 to gain height according to your needs. References fully compatible with each other.

ADAPTABILITY

The user can adapt the assembly according to the height required by having 2 models of base and 2 types of ROSCA without incurring the cost of surplus material.

ITS TILTING NEUTRALISES MORE ANGLE OF SLOPE THAN OTHER BRANDS

UP TO 5.24%!

• Elevation from 10 to 230 mm.
• Suitable for unevenness up to 5.24%.
• Extreme load and weather resistance
• Suitable for the creation of low height raised access floors indoors (SF-10 and SF-20)

How to combine them?

SF-10	SF-10	SBR	SBR 10	SBR 50	SHH
FIXED Fixed height 10mm	FIXED Fixed height 20mm	TILTING Adjustable height 30mm-40mm	TILTING Adjustable height 40mm-80mm	TILTING Adjustable height 80mm-120mm	TILTING Adjustable height 120mm-220mm
1 Support M-1 1 Padding	2 Supports M-1 1 Padding	1 Supports M-1 1 Padding 1 Head 1 Base 1 Retainer 1 Metal Key	1 Support M-1 1 Padding 1 Head 1 Base 1 Retainer 1 Thread 10 1 Metal Key	1 Support M-1 1 Padding 1 Head 1 Base 1 Retainer 1 Thread 50 1 Metal Key	1 Support M-1 1 Padding 1 Head 1 Base XXL 1 Retainer 1 Thread 10 1 Metal Key
			+1 Thread 10 40 mm - 60 mm	+1 Thread 10 80 mm - 100 mm	+1 Thread 10 120 mm - 140 mm
			+2 Thread 10 40 mm - 70 mm	+2 Thread 10 80 mm - 110 mm	+1 Thread 50 120 mm - 180 mm
			+3 Thread 10 40 mm - 80 mm	+3 Thread 10 80 mm - 120 mm	+2 Thread 50 120 mm - 230 mm

LAYING WITH CENTRAL SUPPORT

Floors larger than 60 x 60 cm.

Maximum distance between supports = 60 cm.

The data obtained by crossing the dimensions of the piece (A and B) that you are going to lay are the Plots/m2 for that flooring format.

You will have to multiply this figure by the total m2 you are going to cover with your raised floor to obtain the total number of Plots you are going to need.

Maximum distance between supports = 60 cm.